Abdulaziz Alhotan

Riyadh, Saudi Arabia

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 81 publications

Thirty-Day Thermomechanical Ageing of 3D-Printed and Thermoformed Orthodontic Aligners: A Comparative Force Analysis.

Thirty-Day Thermomechanical Ageing of 3D-Printed and Thermoformed Orthodontic Aligners: A Comparative Force Analysis.

Journal: International dental journal

Published: June 06, 2026

Mechanical performance of high-impact 3D-printed denture base resins subjected to thermomechanical aging.

Mechanical performance of high-impact 3D-printed denture base resins subjected to thermomechanical aging.

Journal: Dental materials : official publication of the Academy of Dental Materials

Published: May 19, 2026

Corrigendum to "Physicochemical and mechanical characterisation of orthodontic 3D-printed aligner material made of shape memory polymers (4D aligner material)" [J. Mech. Behav. Biomed. Mater. 150 (2024) 106337].

Corrigendum to "Physicochemical and mechanical characterisation of orthodontic 3D-printed aligner material made of shape memory polymers (4D aligner material)" [J. Mech. Behav. Biomed. Mater. 150 (2024) 106337].

Journal: Journal of the mechanical behavior of biomedical materials

Published: February 26, 2026

The influence of simulated gastric acid aging on the Martens indentation parameters of subtractive and additive manufactured resins.

The influence of simulated gastric acid aging on the Martens indentation parameters of subtractive and additive manufactured resins.

Journal: The Journal of prosthetic dentistry

Published: January 29, 2026

Effects of simulated gastric acid ageing on Martens hardness of denture base resins fabricated using different techniques.

Effects of simulated gastric acid ageing on Martens hardness of denture base resins fabricated using different techniques.

Journal: Dental materials : official publication of the Academy of Dental Materials

Published: November 29, 2025

Impact of adding silver-doped carbon nanotube fillers to heat-cured acrylic denture base on flexural strength, contact angle and surface roughness.

Impact of adding silver-doped carbon nanotube fillers to heat-cured acrylic denture base on flexural strength, contact angle and surface roughness.

Journal: Scientific reports

Published: October 14, 2025

3D Nanofibrous Scaffolds for Encapsulation-Controlled Vancomycin Delivery: Antibacterial Performance and Cytocompatibility.

3D Nanofibrous Scaffolds for Encapsulation-Controlled Vancomycin Delivery: Antibacterial Performance and Cytocompatibility.

Journal: Polymers

Published: October 10, 2025

Fracture resistance of highly translucent zirconia laminate veneers with different finish line locations.

Fracture resistance of highly translucent zirconia laminate veneers with different finish line locations.

Journal: Scientific reports

Published: August 19, 2025

Comparative numerical finite element analysis of tooth-implant- versus implant-implant-supported three-unit fixed prostheses under oblique loading.

Comparative numerical finite element analysis of tooth-implant- versus implant-implant-supported three-unit fixed prostheses under oblique loading.

Journal: Odontology

Published: August 15, 2025

Mechanical Performance Enhancement of 3D-Printed Temporary Dental Resin by Niobium Nanoparticle Incorporation: An In Vitro Comparative Study with Conventional Composite and 3D Permanent Materials.

Mechanical Performance Enhancement of 3D-Printed Temporary Dental Resin by Niobium Nanoparticle Incorporation: An In Vitro Comparative Study with Conventional Composite and 3D Permanent Materials.

Journal: Polymers

Published: July 29, 2025

Effect of polishing sequence on the surface roughness and flexural strength of additively or subtractively manufactured zirconia.

Effect of polishing sequence on the surface roughness and flexural strength of additively or subtractively manufactured zirconia.

Journal: Journal of prosthodontics : official journal of the American College of Prosthodontists

Published: July 01, 2025

Preclinical evaluation of 3D-Printed orthodontic aligners using an electro-typodont model.

Preclinical evaluation of 3D-Printed orthodontic aligners using an electro-typodont model.

Journal: Frontiers in bioengineering and biotechnology

Published: June 19, 2025

Showing 1-12 of 81

Last Updated: 09/26/2026