Agnes M. Samuel
Montreal, QC H3C1K3, Canada
Last Updated: 09/26/2026
Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 27 publications
A severe case of panitumumab-associated cicatricial ectropion and periorbital dermatitis.
Journal: Canadian journal of ophthalmology. Journal canadien d'ophtalmologie
Published: November 03, 2025
Effects of Alloy Composition, Hardness, and Milling Parameters on the Cutting Forces of Al-Li-Based Alloys.
Journal: Materials (Basel, Switzerland)
Published: March 31, 2025
The Influence of Rare Earth Metals on the Microstructure and Mechanical Properties of 220 and 356.1 Alloys for Automotive Industry.
Journal: Materials (Basel, Switzerland)
Published: January 31, 2025
Effect of Melt Treatment and Heat Treatment on the Performance of Aluminum Cylinder Heads.
Journal: Materials (Basel, Switzerland)
Published: January 30, 2025
Effect of Fe Concentration and Superheating on the Microstructure and Tensile Properties of High Mg 413.0-Type Alloys: Role of Sr, Be, P, and La.
Journal: Materials (Basel, Switzerland)
Published: November 20, 2024
Analysis of Ni-Cu Interaction in Aluminum-Based Alloys: Hardness, Tensile and Precipitation Behavior.
Journal: Materials (Basel, Switzerland)
Published: July 23, 2024
Effect of Aging Treatment on the Strength and Microstructure of 7075-Based Alloys Containing 2% Li and/or 0.12% Sc.
Journal: Materials (Basel, Switzerland)
Published: September 28, 2023
A Review on the Analysis of Thermal and Thermodynamic Aspects of Grain Refinement of Aluminum-Silicon-Based Alloys.
Journal: Materials (Basel, Switzerland)
Published: June 26, 2023
A Comparative Study of Grain Refining of Al-(7-17%) Si Cast Alloys Using Al-10% Ti and Al-4% B Master Alloys.
Journal: Materials (Basel, Switzerland)
Published: February 27, 2023
A Review on Porosity Formation in Aluminum-Based Alloys.
Journal: Materials (Basel, Switzerland)
Published: January 19, 2023
Effect of Cu Content on the Alloy Tensile Properties of Al-Cu Based Alloys Tested at 25 °C and 250 °C: Application of the Concept of Quality Index.
Journal: Materials (Basel, Switzerland)
Published: December 20, 2022
Effect of Si, Mn, Be and Sr Addition on the Tensile Properties of 6061 Type Alloys: Role of Aging Treatment.
Journal: Materials (Basel, Switzerland)
Published: December 16, 2022
Last Updated: 09/26/2026