Angelo Onate

Concepcion, BI, Chile

Last Updated: 09/26/2026

Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 16 publications

Bacterial Cellulose Membranes for Dye Removal: Adsorption Behavior, Thermodynamics, Regeneration, and Performance in Simulated Wastewater.

Bacterial Cellulose Membranes for Dye Removal: Adsorption Behavior, Thermodynamics, Regeneration, and Performance in Simulated Wastewater.

Journal: Biopolymers
Published: June 24, 2026

Exploiting Adiabatic Softening for Defect-Free Hot Forging of Ti-6Al-4V Femoral Stems.

Exploiting Adiabatic Softening for Defect-Free Hot Forging of Ti-6Al-4V Femoral Stems.

Journal: Journal of functional biomaterials
Published: April 30, 2026

RF-Sputtered ZnO Nano-Coatings on Polyamide Thin-Film Composite Membranes for Tuned Nanofiltration Selectivity.

RF-Sputtered ZnO Nano-Coatings on Polyamide Thin-Film Composite Membranes for Tuned Nanofiltration Selectivity.

Journal: Nanomaterials (Basel, Switzerland)
Published: March 06, 2026

Computational Design of High-Performance U-Shaped Seismic Dampers Using Statistical Optimization.

Computational Design of High-Performance U-Shaped Seismic Dampers Using Statistical Optimization.

Journal: Materials (Basel, Switzerland)
Published: November 12, 2025

Fracture behavior of Ti-6Al-4V in the extreme thermo-mechanical environment of fan blade-out.

Fracture behavior of Ti-6Al-4V in the extreme thermo-mechanical environment of fan blade-out.

Journal: Scientific reports
Published: September 21, 2025

Mechanical Performance of Plywood TIE Joints Under Tension and Shear in the WikiHouse Skylark Modular System.

Mechanical Performance of Plywood TIE Joints Under Tension and Shear in the WikiHouse Skylark Modular System.

Journal: Materials (Basel, Switzerland)
Published: September 18, 2025

Compressive Behavior of 316L Stainless Steel Lattice Structures for Additive Manufacturing: Experimental Characterization and Numerical Modeling.

Compressive Behavior of 316L Stainless Steel Lattice Structures for Additive Manufacturing: Experimental Characterization and Numerical Modeling.

Journal: Biomimetics (Basel, Switzerland)
Published: September 17, 2025

Density-Based Topology-Optimized 3D-Printed Fixtures for Cyclic Mechanical Testing of Lattice Structures.

Density-Based Topology-Optimized 3D-Printed Fixtures for Cyclic Mechanical Testing of Lattice Structures.

Journal: Polymers
Published: August 22, 2025

Recent Advances in the Analysis of Functional and Structural Polymer Composites for Wind Turbines.

Recent Advances in the Analysis of Functional and Structural Polymer Composites for Wind Turbines.

Journal: Polymers
Published: July 27, 2025

Poly(3-hydroxybutyrate)/Clay/Essential Oils Bionanocomposites Incorporating Biochar: Thermo-Mechanical and Antioxidant Properties.

Poly(3-hydroxybutyrate)/Clay/Essential Oils Bionanocomposites Incorporating Biochar: Thermo-Mechanical and Antioxidant Properties.

Journal: Polymers
Published: February 20, 2025

Biomimetic Lattice Structures Design and Manufacturing for High Stress, Deformation, and Energy Absorption Performance.

Biomimetic Lattice Structures Design and Manufacturing for High Stress, Deformation, and Energy Absorption Performance.

Journal: Biomimetics (Basel, Switzerland)
Published: February 18, 2025

Miniaturized Shear Testing: In-Plane and Through-Thickness Characterization of Plywood.

Miniaturized Shear Testing: In-Plane and Through-Thickness Characterization of Plywood.

Journal: Materials (Basel, Switzerland)
Published: October 23, 2024
Showing 1-12 of 16

Last Updated: 09/26/2026