Anthony W. Miles

Bath, ENG, United Kingdom

Last Updated: 09/26/2026

Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 29 publications

Nonlinear viscoelastic models improve characterisation of 6 DOF intervertebral disc load response at low strain rates.

Nonlinear viscoelastic models improve characterisation of 6 DOF intervertebral disc load response at low strain rates.

Journal: Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine
Published: January 26, 2026

The effect of structural changes on the low strain rate behaviour of the intervertebral disc.

The effect of structural changes on the low strain rate behaviour of the intervertebral disc.

Journal: Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine
Published: August 24, 2024

Author reply to letter to the editor.

Author reply to letter to the editor.

Journal: Injury
Published: June 06, 2022

Influence of pilot hole diameter in cancellous screw fixation in a reduced density animal bone model.

Influence of pilot hole diameter in cancellous screw fixation in a reduced density animal bone model.

Journal: Clinical biomechanics (Bristol, Avon)
Published: March 23, 2020

Biomechanical testing of fixed and adjustable femoral cortical suspension devices for ACL reconstruction under high loads and extended cyclic loading.

Biomechanical testing of fixed and adjustable femoral cortical suspension devices for ACL reconstruction under high loads and extended cyclic loading.

Journal: Journal of experimental orthopaedics
Published: January 02, 2020

Novel techniques demonstrate superior fixation of simple transverse patella fractures - A biomechanical study.

Novel techniques demonstrate superior fixation of simple transverse patella fractures - A biomechanical study.

Journal: Injury
Published: September 08, 2019

The equivalence of multi-axis spine systems: Recommended stiffness limits using a standardized testing protocol.

The equivalence of multi-axis spine systems: Recommended stiffness limits using a standardized testing protocol.

Journal: Journal of biomechanics
Published: May 31, 2017

Non-invasive vibrometry-based diagnostic detection of acetabular cup loosening in total hip replacement (THR).

Non-invasive vibrometry-based diagnostic detection of acetabular cup loosening in total hip replacement (THR).

Journal: Medical engineering & physics
Published: December 27, 2016

Assessment of Head Displacement and Disassembly Force With Increasing Assembly Load at the Head/Trunnion Junction of a Total Hip Arthroplasty Prosthesis.

Assessment of Head Displacement and Disassembly Force With Increasing Assembly Load at the Head/Trunnion Junction of a Total Hip Arthroplasty Prosthesis.

Journal: The Journal of arthroplasty
Published: August 06, 2016

The application of physiological loading using a dynamic, multi-axis spine simulator.

The application of physiological loading using a dynamic, multi-axis spine simulator.

Journal: Medical engineering & physics
Published: May 18, 2016

Effect of trunnion roughness and length on the modular taper junction strength under typical intraoperative assembly forces.

Effect of trunnion roughness and length on the modular taper junction strength under typical intraoperative assembly forces.

Journal: Medical engineering & physics
Published: April 03, 2016

Dynamic, six-axis stiffness matrix characteristics of the intact intervertebral disc and a disc replacement.

Dynamic, six-axis stiffness matrix characteristics of the intact intervertebral disc and a disc replacement.

Journal: Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine
Published: October 28, 2015
Showing 1-12 of 29

Last Updated: 09/26/2026