Chiara Bregoli

Via Gaetano Previati, 1/E
Lecco, 23900, Italy

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 14 publications

Development of an Ergonomic Additively Manufactured Modular Saddle for Rehabilitation Cycling.

Development of an Ergonomic Additively Manufactured Modular Saddle for Rehabilitation Cycling.

Journal: Materials (Basel, Switzerland)

Published: September 30, 2025

Biomechanical study of an additively manufactured NiTi patient-specific device for the treatment of craniosynostosis.

Biomechanical study of an additively manufactured NiTi patient-specific device for the treatment of craniosynostosis.

Journal: Journal of the mechanical behavior of biomedical materials

Published: January 10, 2025

Impact of Surface Finishing on Ti6Al4V Voronoi Additively Manufactured Structures: Morphology, Dimensional Deviation, and Mechanical Behavior.

Impact of Surface Finishing on Ti6Al4V Voronoi Additively Manufactured Structures: Morphology, Dimensional Deviation, and Mechanical Behavior.

Journal: Materials (Basel, Switzerland)

Published: September 11, 2024

Biological Characterization of Ti6Al4V Additively Manufactured Surfaces: Comparison Between Ultrashort Laser Texturing and Conventional Post-Processing.

Biological Characterization of Ti6Al4V Additively Manufactured Surfaces: Comparison Between Ultrashort Laser Texturing and Conventional Post-Processing.

Journal: Advanced healthcare materials

Published: August 02, 2024

In Vitro Assessment of the Neuro-Compatibility of Fe-20Mn as a Potential Bioresorbable Material for Craniofacial Surgery.

In Vitro Assessment of the Neuro-Compatibility of Fe-20Mn as a Potential Bioresorbable Material for Craniofacial Surgery.

Journal: Medicina (Kaunas, Lithuania)

Published: February 06, 2024

A patient-matched prosthesis for thumb amputations: Design, mechanical and functional evaluation.

A patient-matched prosthesis for thumb amputations: Design, mechanical and functional evaluation.

Journal: Medical engineering & physics

Published: January 24, 2024

Effect of trabecular architectures on the mechanical response in osteoporotic and healthy human bone.

Effect of trabecular architectures on the mechanical response in osteoporotic and healthy human bone.

Journal: Medical & biological engineering & computing

Published: December 05, 2023

Bactericidal Activity of Silver-Doped Chitosan Coatings via Electrophoretic Deposition on Ti6Al4V Additively Manufactured Substrates.

Bactericidal Activity of Silver-Doped Chitosan Coatings via Electrophoretic Deposition on Ti6Al4V Additively Manufactured Substrates.

Journal: Polymers

Published: September 25, 2023

Patient-matched osseointegrated prostheses for thumb amputees: a cadaver and feasibility study.

Patient-matched osseointegrated prostheses for thumb amputees: a cadaver and feasibility study.

Journal: The Journal of hand surgery, European volume

Published: August 22, 2023

A biomechanical study of osseointegrated patient-matched additively manufactured implant for treatment of thumb amputees.

A biomechanical study of osseointegrated patient-matched additively manufactured implant for treatment of thumb amputees.

Journal: Medical engineering & physics

Published: April 12, 2023

Osseointegrated Metallic Implants for Finger Amputees: A Review of the Literature.

Osseointegrated Metallic Implants for Finger Amputees: A Review of the Literature.

Journal: Orthopaedic surgery

Published: March 10, 2022

Sensors and Actuation Technologies in Exoskeletons: A Review.

Sensors and Actuation Technologies in Exoskeletons: A Review.

Journal: Sensors (Basel, Switzerland)

Published: December 31, 2021

Showing 1-12 of 14

Last Updated: 09/26/2026