Chuansheng L. Wang

National Engineering Research Center Of Advanced Tire Equipment And Key Materials
Qingdao, 266061, China

Last Updated: 09/26/2026

Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 29 publications

Study on in-situ and ex-situ catalytic pyrolysis of waste tires based on low-cost catalysts.

Study on in-situ and ex-situ catalytic pyrolysis of waste tires based on low-cost catalysts.

Journal: Waste management (New York, N.Y.)
Published: April 11, 2025

Optimization of Mechanical and Dynamic Properties of Tread Rubber Using Fumed Silica and Hydration Processing.

Optimization of Mechanical and Dynamic Properties of Tread Rubber Using Fumed Silica and Hydration Processing.

Journal: Polymers
Published: January 18, 2025

The Impact of High-Speed Crushing Process of Fibrous Polytetrafluoroethylene on Pyrolyzed Carbon Black/Natural Rubber Composites.

The Impact of High-Speed Crushing Process of Fibrous Polytetrafluoroethylene on Pyrolyzed Carbon Black/Natural Rubber Composites.

Journal: Polymers
Published: November 23, 2024

Effects of Different Die Metals on the Performance and Friction and Wear of Composite Materials during the Extrusion Process.

Effects of Different Die Metals on the Performance and Friction and Wear of Composite Materials during the Extrusion Process.

Journal: Polymers
Published: October 16, 2023

Study on the Mechanism and Experiment of Styrene Butadiene Rubber Reinforcement by Spent Fluid Catalytic Cracking Catalyst.

Study on the Mechanism and Experiment of Styrene Butadiene Rubber Reinforcement by Spent Fluid Catalytic Cracking Catalyst.

Journal: Polymers
Published: January 07, 2023

Study on synergistic pyrolysis and kinetics of mixed plastics based on spent fluid-catalytic-cracking catalyst.

Study on synergistic pyrolysis and kinetics of mixed plastics based on spent fluid-catalytic-cracking catalyst.

Journal: Environmental science and pollution research international
Published: December 29, 2022

Effect of Wet Mixing on Properties of Radial-Orientation Basalt Fiber-Reinforced Rubber Compounds.

Effect of Wet Mixing on Properties of Radial-Orientation Basalt Fiber-Reinforced Rubber Compounds.

Journal: Polymers
Published: August 29, 2022

Influence of the Synergistic Effect of Multi-Walled Carbon Nanotubes and Carbon Fibers in the Rubber Matrix on the Friction and Wear of Metals during the Mixing Process.

Influence of the Synergistic Effect of Multi-Walled Carbon Nanotubes and Carbon Fibers in the Rubber Matrix on the Friction and Wear of Metals during the Mixing Process.

Journal: Polymers
Published: August 22, 2022

Effect of Interfacial Lubrication between Rubber and Metal on Reducing Mixer Chamber Wall Wear in Mixing Process.

Effect of Interfacial Lubrication between Rubber and Metal on Reducing Mixer Chamber Wall Wear in Mixing Process.

Journal: Polymers
Published: August 04, 2022

Research on Friction and Wear Properties of Rubber Composites by Adding Glass Fiber during Mixing.

Research on Friction and Wear Properties of Rubber Composites by Adding Glass Fiber during Mixing.

Journal: Polymers
Published: June 23, 2022

Effect of the Addition of Different Amounts of Aramid Fibers on Metal Friction and Wear during Mixing.

Effect of the Addition of Different Amounts of Aramid Fibers on Metal Friction and Wear during Mixing.

Journal: Polymers
Published: May 17, 2022

The Effect of Different Dosages of TESPT on Metal Friction and Metal Wear in the Mixing Process.

The Effect of Different Dosages of TESPT on Metal Friction and Metal Wear in the Mixing Process.

Journal: Polymers
Published: May 16, 2022
Showing 1-12 of 29

Last Updated: 09/26/2026