Chun-li Y. Lin
2 No.155, Sec.2, Linong Street
Taipei, TNQ, Taiwan
Taipei, TNQ, Taiwan
Last Updated: 09/26/2026
Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 73 publications
Biomechanical comparison of mini-plate and screw fixation in minimally invasive distal metatarsal osteotomy for hallux valgus : a finite element and cadaveric study.
Journal: Bone & joint research
Published: August 31, 2026
A Novel Titanium End-Disc-Assisted Allograft Preparation System for Anterior Cervical Corpectomy and Fusion: Development and Preliminary Biomechanical Evaluation.
Journal: Bioengineering (Basel, Switzerland)
Published: June 30, 2026
Corrigendum to "Bioabsorbable magnesium-based bulk metallic glass composite (BMGC) for improved medial opening wedge high tibial osteotomy in knee osteoarthritis" [J Orthop Transl 50, January 2025, Pages 97-110].
Journal: Journal of orthopaedic translation
Published: March 04, 2026
3D printing enabled biomechanical evaluation of a novel expandable wedge spacer for atlantoaxial reduction.
Journal: 3D printing in medicine
Published: October 19, 2025
A Dual-Thread Lag-Locking Screw Enhances Single Lateral Plate Fixation in Bicondylar Tibial Plateau Fractures: A Biomechanical Study.
Journal: Bioengineering (Basel, Switzerland)
Published: September 02, 2025
Early-stage stability and degradation of patient-specific biodegradable 3D-printed implants for critical mandibular reconstruction.
Journal: Dental materials : official publication of the Academy of Dental Materials
Published: August 29, 2025
Short Expandable-Wing Suture Anchor for Osteoporotic and Small Bone Fixation: Validation in a 3D-Printed Coracoclavicular Reconstruction Model.
Journal: Journal of functional biomaterials
Published: August 28, 2025
Mechanical assessment of a titanium cervical spine corpectomy cage assembled with 3D-printed patient-specific endplate-conformed contact surfaces and a traditionally manufactured expandable mechanism.
Journal: 3D printing in medicine
Published: June 05, 2025
Standardized Morphological Modeling and Simulation-Based Validation of a Novel Tibiotalar Fusion Implant.
Journal: Bioengineering (Basel, Switzerland)
Published: June 04, 2025
Platelet-Rich Fibrin Synthetic Bone Graft Enhances Bone Regeneration and Mechanical Strength in Rabbit Femoral Defects: Micro-CT and Biomechanical Study.
Journal: Journal of functional biomaterials
Published: May 19, 2025
Increasing Nebulizer Spray Efficiency Using a Baffle with a Conical Surface: A Computational Fluid Dynamics Analysis.
Journal: Bioengineering (Basel, Switzerland)
Published: May 12, 2025
Biomechanical Design and Validation of a Novel Elliptical Sleeve Pedicle Screw for Enhanced Spinal Fixation Stability.
Journal: Bioengineering (Basel, Switzerland)
Published: May 09, 2025
Last Updated: 09/26/2026