Irene Buj-Corral

Diagonal Av, 647. 08028
Barcelona, CT 08028, Spain

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 24 publications

Characterization of 3D-Printed Glass Fiber-Filled and Calcium Carbonate-Filled Polypropylene Components for Surgical Planning.

Characterization of 3D-Printed Glass Fiber-Filled and Calcium Carbonate-Filled Polypropylene Components for Surgical Planning.

Journal: Polymers

Published: July 29, 2025

Selection of Network Parameters in Direct ANN Modeling of Roughness Obtained in FFF Processes.

Selection of Network Parameters in Direct ANN Modeling of Roughness Obtained in FFF Processes.

Journal: Polymers

Published: December 07, 2024

Advanced Strategies for the Fabrication of Multi-Material Anatomical Models of Complex Pediatric Oncologic Cases.

Advanced Strategies for the Fabrication of Multi-Material Anatomical Models of Complex Pediatric Oncologic Cases.

Journal: Bioengineering (Basel, Switzerland)

Published: October 16, 2023

Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training.

Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training.

Journal: Gels (Basel, Switzerland)

Published: February 06, 2023

Comparative Study about Dimensional Accuracy and Surface Finish of Constant-Breadth Cams Manufactured by FFF and CNC Milling.

Comparative Study about Dimensional Accuracy and Surface Finish of Constant-Breadth Cams Manufactured by FFF and CNC Milling.

Journal: Micromachines

Published: December 02, 2022

3D Printing of Bioinert Oxide Ceramics for Medical Applications.

3D Printing of Bioinert Oxide Ceramics for Medical Applications.

Journal: Journal of functional biomaterials

Published: August 22, 2022

Characterization of 3D Printed Metal-PLA Composite Scaffolds for Biomedical Applications.

Characterization of 3D Printed Metal-PLA Composite Scaffolds for Biomedical Applications.

Journal: Polymers

Published: May 31, 2022

Soft-Tissue-Mimicking Using Hydrogels for the Development of Phantoms.

Soft-Tissue-Mimicking Using Hydrogels for the Development of Phantoms.

Journal: Gels (Basel, Switzerland)

Published: November 27, 2021

Optimization and Sensitivity Analysis of the Cutting Conditions in Rough, Semi-Finish and Finish Honing.

Optimization and Sensitivity Analysis of the Cutting Conditions in Rough, Semi-Finish and Finish Honing.

Journal: Materials (Basel, Switzerland)

Published: November 25, 2021

Modeling of the Influence of Input AM Parameters on Dimensional Error and Form Errors in PLA Parts Printed with FFF Technology.

Modeling of the Influence of Input AM Parameters on Dimensional Error and Form Errors in PLA Parts Printed with FFF Technology.

Journal: Polymers

Published: October 15, 2021

Characterization of 3D Printed Yttria-Stabilized Zirconia Parts for Use in Prostheses.

Characterization of 3D Printed Yttria-Stabilized Zirconia Parts for Use in Prostheses.

Journal: Nanomaterials (Basel, Switzerland)

Published: September 24, 2021

Influence of Infill Pattern on the Elastic Mechanical Properties of Fused Filament Fabrication (FFF) Parts through Experimental Tests and Numerical Analyses.

Influence of Infill Pattern on the Elastic Mechanical Properties of Fused Filament Fabrication (FFF) Parts through Experimental Tests and Numerical Analyses.

Journal: Materials (Basel, Switzerland)

Published: July 27, 2021

Showing 1-12 of 24

Last Updated: 09/26/2026