Kamil Joszko

Roosevelta 40 Str
Zabrze, SL 41800, Poland

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 17 publications

Use of Citrus Peel Waste as Bio-Fillers in Polyester Resin Composites: Analysis of Mechanical Properties.

Use of Citrus Peel Waste as Bio-Fillers in Polyester Resin Composites: Analysis of Mechanical Properties.

Journal: Materials (Basel, Switzerland)

Published: January 27, 2026

The Influence of Hot Isostatic Pressing on the Mechanical Properties of Ti-6Al-4V Samples Printed Using the LENS Method.

The Influence of Hot Isostatic Pressing on the Mechanical Properties of Ti-6Al-4V Samples Printed Using the LENS Method.

Journal: Materials (Basel, Switzerland)

Published: November 04, 2024

Biomimetic Natural Biomaterial Nanocomposite Scaffolds: A Rising Prospect for Bone Replacement.

Biomimetic Natural Biomaterial Nanocomposite Scaffolds: A Rising Prospect for Bone Replacement.

Journal: International journal of molecular sciences

Published: September 29, 2024

Usage of 3D prints with ceramic coating applied as neurological tools - preliminary research.

Usage of 3D prints with ceramic coating applied as neurological tools - preliminary research.

Journal: Acta of bioengineering and biomechanics

Published: January 31, 2024

Biomechanical Evaluation of Temporomandibular Joint Reconstruction Using Individual TMJ Prosthesis Combined with a Fibular Free Flap in a Pediatric Patient.

Biomechanical Evaluation of Temporomandibular Joint Reconstruction Using Individual TMJ Prosthesis Combined with a Fibular Free Flap in a Pediatric Patient.

Journal: Bioengineering (Basel, Switzerland)

Published: March 15, 2023

Hybrid Nanofillers Creating the Stable PVDF Nanocomposite Films and Their Effect on the Friction and Mechanical Properties.

Hybrid Nanofillers Creating the Stable PVDF Nanocomposite Films and Their Effect on the Friction and Mechanical Properties.

Journal: Polymers

Published: August 22, 2022

The Analysis of Polyethylene Hip Joint Endoprostheses Strength Parameters Changes after Use inside the Human Body.

The Analysis of Polyethylene Hip Joint Endoprostheses Strength Parameters Changes after Use inside the Human Body.

Journal: Materials (Basel, Switzerland)

Published: September 28, 2021

Development of Novel Thin Polycaprolactone (PCL)/Clay Nanocomposite Films with Antimicrobial Activity Promoted by the Study of Mechanical, Thermal, and Surface Properties.

Development of Novel Thin Polycaprolactone (PCL)/Clay Nanocomposite Films with Antimicrobial Activity Promoted by the Study of Mechanical, Thermal, and Surface Properties.

Journal: Polymers

Published: August 17, 2021

Assessment of the Impact of Decellularization Methods on Mechanical Properties of Biocomposites Used as Skin Substitute.

Assessment of the Impact of Decellularization Methods on Mechanical Properties of Biocomposites Used as Skin Substitute.

Journal: Materials (Basel, Switzerland)

Published: July 09, 2021

Lower Leg Injury Mechanism Investigation During an IED Blast Under a Vehicle Using an Anatomic Leg Model.

Lower Leg Injury Mechanism Investigation During an IED Blast Under a Vehicle Using an Anatomic Leg Model.

Journal: Frontiers in bioengineering and biotechnology

Published: June 14, 2021

Functional Properties of Polyurethane Ureteral Stents with PLGA and Papaverine Hydrochloride Coating.

Functional Properties of Polyurethane Ureteral Stents with PLGA and Papaverine Hydrochloride Coating.

Journal: International journal of molecular sciences

Published: May 14, 2021

Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing.

Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing.

Journal: Materials (Basel, Switzerland)

Published: February 24, 2021

Showing 1-12 of 17

Last Updated: 09/26/2026