Konda G. Prashanth
Vellore, TN 632014, India
Last Updated: 09/26/2026
Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 34 publications
Effect of Grain Size Distribution on Frictional Wear and Corrosion Properties of (FeCoNi)86Al7Ti7 High-Entropy Alloys.
Journal: Entropy (Basel, Switzerland)
Published: June 14, 2025
An Investigation into the Thermomechanical Processing and Dynamic Recrystallization Mechanisms of High-Magnesium Aluminum Alloys.
Journal: Materials (Basel, Switzerland)
Published: April 27, 2025
Interpenetrating Composites: A Nomenclature Dilemma.
Journal: Materials (Basel, Switzerland)
Published: October 28, 2024
Synergistic Strengthening Mechanisms of Dual-Phase (TiN+AlN) Reinforced Aluminum Matrix Composites Prepared by Laser Powder Bed Fusion.
Journal: 3D printing and additive manufacturing
Published: October 03, 2024
In situ production of low-modulus Ti-Nb alloys by selective laser melting and their functional assessment toward orthopedic applications.
Journal: Journal of materials chemistry. B
Published: May 29, 2024
Circumventing Solidification Cracking Susceptibility in Al-Cu Alloys Prepared by Laser Powder Bed Fusion.
Journal: 3D printing and additive manufacturing
Published: May 01, 2024
Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting.
Journal: 3D printing and additive manufacturing
Published: May 01, 2024
In Vivo Assessment of a Triple Periodic Minimal Surface Based Biomimmetic Gyroid as an Implant Material in a Rabbit Tibia Model.
Journal: ACS materials Au
Published: February 29, 2024
Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures.
Journal: 3D printing and additive manufacturing
Published: February 23, 2024
EBSD investigation of microstructure and microtexture evolution on additively manufactured TiC-Fe based cermets-Influence of multiple laser scanning.
Journal: Micron (Oxford, England : 1993)
Published: December 19, 2023
NiTi-Cu Bimetallic Structure Fabrication through Wire Arc Additive Manufacturing.
Journal: Materials (Basel, Switzerland)
Published: December 17, 2023
Selective Laser Melting and Spark Plasma Sintering: A Perspective on Functional Biomaterials.
Journal: Journal of functional biomaterials
Published: August 25, 2023
Last Updated: 09/26/2026