Leonard C. Pastrav
Leuven, VLG 3001, Belgium
Last Updated: 09/26/2026
Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 13 publications
Friction and wear reduction effect of laser powder bed fusion produced Voronoi structures in lubricated metal-polymer sliding pairs.
Journal: Journal of the mechanical behavior of biomedical materials
Published: March 27, 2025
Contactless femoral implant stability monitoring in cementless total hip arthroplasty, A step towards clinical implementation.
Journal: Medical engineering & physics
Published: November 24, 2023
Development of an Instrument to Assess the Stability of Cementless Femoral Implants Using Vibration Analysis During Total Hip Arthroplasty.
Journal: IEEE journal of translational engineering in health and medicine
Published: April 20, 2021
The Use of a Vibro-Acoustic Based Method to Determine the Composite Material Properties of a Replicate Clavicle Bone Model.
Journal: Journal of functional biomaterials
Published: July 13, 2020
Acoustic analysis to monitor implant seating and early detect fractures in cementless THA: An in vivo study.
Journal: Journal of orthopaedic research : official publication of the Orthopaedic Research Society
Published: April 15, 2020
Two Different Methods to Measure the Stability of Acetabular Implants: A Comparison Using Artificial Acetabular Models.
Journal: Sensors (Basel, Switzerland)
Published: December 11, 2019
Modal frequency and shape curvature as a measure of implant fixation: A computer study on the acetabular cup.
Journal: Medical engineering & physics
Published: October 05, 2017
Vibration-based fixation assessment of tibial knee implants: A combined in vitro and in silico feasibility study.
Journal: Medical engineering & physics
Published: October 27, 2016
Determination of replicate composite bone material properties using modal analysis.
Journal: Journal of the mechanical behavior of biomedical materials
Published: August 10, 2016
Development of an acoustic measurement protocol to monitor acetabular implant fixation in cementless total hip Arthroplasty: A preliminary study.
Journal: Medical engineering & physics
Published: July 12, 2016
A biomechanical testing system to determine micromotion between hip implant and femur accounting for deformation of the hip implant: Assessment of the influence of rigid body assumptions on micromotions measurements.
Journal: Clinical biomechanics (Bristol, Avon)
Published: April 21, 2016
A nondestructive method to verify the glenosphere-baseplate assembly in reverse shoulder arthroplasty.
Journal: Journal of shoulder and elbow surgery
Published: October 11, 2015
Last Updated: 09/26/2026