Matjaz Godec

Ljubljana, 1000, Slovenia

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 22 publications

Grain-resolved mapping of oxygen evolution activation on a Ni-superalloy.

Grain-resolved mapping of oxygen evolution activation on a Ni-superalloy.

Journal: Chemical communications (Cambridge, England)

Published: August 20, 2025

Workflow and Practical Guidance for Identical Location Scanning Electron Microscopy: Reliable Tracking of Localized Transformations.

Workflow and Practical Guidance for Identical Location Scanning Electron Microscopy: Reliable Tracking of Localized Transformations.

Journal: Small methods

Published: July 01, 2025

Enhanced Performance of Austenitic Oxide Dispersion-Strengthened 316L Steel: A Study on Y2O3 Reinforcement and Corrosion Behaviour.

Enhanced Performance of Austenitic Oxide Dispersion-Strengthened 316L Steel: A Study on Y2O3 Reinforcement and Corrosion Behaviour.

Journal: Materials (Basel, Switzerland)

Published: January 10, 2025

Laser Powder Bed Fusion Parameters Optimization for Enhanced Mechanical Properties of EOS Co-Cr Dental Alloy.

Laser Powder Bed Fusion Parameters Optimization for Enhanced Mechanical Properties of EOS Co-Cr Dental Alloy.

Journal: Materials (Basel, Switzerland)

Published: September 18, 2024

Characterization of Micro-Threaded Stem Taper Surfaces of Cementless Hip Endoprostheses.

Characterization of Micro-Threaded Stem Taper Surfaces of Cementless Hip Endoprostheses.

Journal: Materials (Basel, Switzerland)

Published: May 07, 2024

The Impact of Al2O3 Particles from Grit-Blasted Ti6Al7Nb (Alloy) Implant Surfaces on Biocompatibility, Aseptic Loosening, and Infection.

The Impact of Al2O3 Particles from Grit-Blasted Ti6Al7Nb (Alloy) Implant Surfaces on Biocompatibility, Aseptic Loosening, and Infection.

Journal: Materials (Basel, Switzerland)

Published: September 27, 2023

Solidification Behavior of Fe-6.5Si Alloy Powder for AM-SLM Processing, as Assessed by Differential Scanning Calorimetry.

Solidification Behavior of Fe-6.5Si Alloy Powder for AM-SLM Processing, as Assessed by Differential Scanning Calorimetry.

Journal: Materials (Basel, Switzerland)

Published: May 12, 2023

Complex Interdependency of Microstructure, Mechanical Properties, Fatigue Resistance, and Residual Stress of Austenitic Stainless Steels AISI 304L.

Complex Interdependency of Microstructure, Mechanical Properties, Fatigue Resistance, and Residual Stress of Austenitic Stainless Steels AISI 304L.

Journal: Materials (Basel, Switzerland)

Published: March 02, 2023

Additively Manufactured Commercial Co-Cr Dental Alloys: Comparison of Microstructure and Mechanical Properties.

Additively Manufactured Commercial Co-Cr Dental Alloys: Comparison of Microstructure and Mechanical Properties.

Journal: Materials (Basel, Switzerland)

Published: November 04, 2021

Evolution of the ε and γ phases in biodegradable Fe-Mn alloys produced using laser powder-bed fusion.

Evolution of the ε and γ phases in biodegradable Fe-Mn alloys produced using laser powder-bed fusion.

Journal: Scientific reports

Published: July 29, 2021

Use of plasma nitriding to improve the wear and corrosion resistance of 18Ni-300 maraging steel manufactured by selective laser melting.

Use of plasma nitriding to improve the wear and corrosion resistance of 18Ni-300 maraging steel manufactured by selective laser melting.

Journal: Scientific reports

Published: December 01, 2020

Publisher Correction: An improved method of crafting a multi-electrode spiral cuff for the selective stimulation of peripheral nerves.

Publisher Correction: An improved method of crafting a multi-electrode spiral cuff for the selective stimulation of peripheral nerves.

Journal: Scientific reports

Published: November 20, 2018

Showing 1-12 of 22

Last Updated: 09/26/2026