Mihai A. Pop

29 Eroilor Blvd
Brasov, BV 500036, Romania

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 24 publications

Development and Characterization of High-Density Polyethylene/Polylactic Acid/Titanium Dioxide Composites for Pellet-Based 3D Printing.

Development and Characterization of High-Density Polyethylene/Polylactic Acid/Titanium Dioxide Composites for Pellet-Based 3D Printing.

Journal: Polymers

Published: March 15, 2026

Advances in Sustainable Polymeric Materials, 3rd Edition.

Advances in Sustainable Polymeric Materials, 3rd Edition.

Journal: Polymers

Published: February 24, 2026

Mechanical Characteristics of Glass-Fiber-Reinforced Polyester Composite Materials.

Mechanical Characteristics of Glass-Fiber-Reinforced Polyester Composite Materials.

Journal: Materials (Basel, Switzerland)

Published: June 30, 2025

Influence of the Fill Value Parameters on Acoustic and Physical-Mechanical Performance of 3D-Printed Panels.

Influence of the Fill Value Parameters on Acoustic and Physical-Mechanical Performance of 3D-Printed Panels.

Journal: Polymers

Published: May 21, 2025

Effects of Homogenization Heat Treatment on Microstructure of Inconel 718 Lattice Structures Manufactured by Selective Laser Melting.

Effects of Homogenization Heat Treatment on Microstructure of Inconel 718 Lattice Structures Manufactured by Selective Laser Melting.

Journal: Materials (Basel, Switzerland)

Published: May 12, 2025

Application of concentrated solar energy in postprocessing of selective laser melted Ti6Al4V alloy through simultaneously gas nitriding and heat treatment.

Application of concentrated solar energy in postprocessing of selective laser melted Ti6Al4V alloy through simultaneously gas nitriding and heat treatment.

Journal: Scientific reports

Published: May 09, 2025

Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments.

Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments.

Journal: Polymers

Published: December 13, 2024

Thermal and Sound Insulation Properties of Organic Biocomposite Mixtures.

Thermal and Sound Insulation Properties of Organic Biocomposite Mixtures.

Journal: Polymers

Published: February 09, 2024

Investigation into the Acoustic Properties of Polylactic Acid Sound-Absorbing Panels Manufactured by 3D Printing Technology: The Influence of Nozzle Diameters and Internal Configurations.

Investigation into the Acoustic Properties of Polylactic Acid Sound-Absorbing Panels Manufactured by 3D Printing Technology: The Influence of Nozzle Diameters and Internal Configurations.

Journal: Materials (Basel, Switzerland)

Published: January 05, 2024

Mechanical Properties and Microstructure of Inconel 718 Lattice Structures Produced by Selective Laser Melting Process.

Mechanical Properties and Microstructure of Inconel 718 Lattice Structures Produced by Selective Laser Melting Process.

Journal: Materials (Basel, Switzerland)

Published: December 22, 2023

Sound Absorption Performance and Mechanical Properties of the 3D-Printed Bio-Degradable Panels.

Sound Absorption Performance and Mechanical Properties of the 3D-Printed Bio-Degradable Panels.

Journal: Polymers

Published: July 24, 2023

3D-Printed PLA Molds for Natural Composites: Mechanical Properties of Green Wax-Based Composites.

3D-Printed PLA Molds for Natural Composites: Mechanical Properties of Green Wax-Based Composites.

Journal: Polymers

Published: April 25, 2023

Showing 1-12 of 24

Last Updated: 09/26/2026