Munish K. Gupta

Key Laboratory Of High Efficiency And Clean Mechanical Manufacture
Jinan, 250061, China

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 38 publications

A State of the Art on Cryogenic Cooling and Its Applications in the Machining of Difficult-to-Machine Alloys.

A State of the Art on Cryogenic Cooling and Its Applications in the Machining of Difficult-to-Machine Alloys.

Journal: Materials (Basel, Switzerland)

Published: March 15, 2024

Assessment of carbonized himalayan chir pine biomass as an eco-friendly adsorbent for effective removal of industrial dyes.

Assessment of carbonized himalayan chir pine biomass as an eco-friendly adsorbent for effective removal of industrial dyes.

Journal: Scientific reports

Published: March 02, 2024

Studying the Effect of Short Carbon Fiber on Fused Filament Fabrication Parts Roughness via Machine Learning.

Studying the Effect of Short Carbon Fiber on Fused Filament Fabrication Parts Roughness via Machine Learning.

Journal: 3D printing and additive manufacturing

Published: December 20, 2023

Initial study on an expert system for spine diseases screening using inertial measurement unit.

Initial study on an expert system for spine diseases screening using inertial measurement unit.

Journal: Scientific reports

Published: November 24, 2022

Optimization of WEDM Parameters While Machining Biomedical Materials Using EDAS-PSO.

Optimization of WEDM Parameters While Machining Biomedical Materials Using EDAS-PSO.

Journal: Materials (Basel, Switzerland)

Published: October 01, 2022

A Novel Unsupervised Machine Learning-Based Method for Chatter Detection in the Milling of Thin-Walled Parts.

A Novel Unsupervised Machine Learning-Based Method for Chatter Detection in the Milling of Thin-Walled Parts.

Journal: Sensors (Basel, Switzerland)

Published: July 28, 2021

Multi-Perspective Analysis of Building Orientation Effects on Microstructure, Mechanical and Surface Properties of SLM Ti6Al4V with Specific Geometry.

Multi-Perspective Analysis of Building Orientation Effects on Microstructure, Mechanical and Surface Properties of SLM Ti6Al4V with Specific Geometry.

Journal: Materials (Basel, Switzerland)

Published: July 07, 2021

Relationship between Pressure and Output Parameters in Belt Grinding of Steels and Nickel Alloy.

Relationship between Pressure and Output Parameters in Belt Grinding of Steels and Nickel Alloy.

Journal: Materials (Basel, Switzerland)

Published: July 04, 2021

Parametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy.

Parametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy.

Journal: Materials (Basel, Switzerland)

Published: March 15, 2021

Establishing the Relationship between Cutting Speed and Output Parameters in Belt Grinding on Steels, Aluminum and Nickel Alloys: Development of Recommendations.

Establishing the Relationship between Cutting Speed and Output Parameters in Belt Grinding on Steels, Aluminum and Nickel Alloys: Development of Recommendations.

Journal: Materials (Basel, Switzerland)

Published: March 13, 2021

Extrusion-Based 3D Printing of Ceramic Pastes: Mathematical Modeling and In Situ Shaping Retention Approach.

Extrusion-Based 3D Printing of Ceramic Pastes: Mathematical Modeling and In Situ Shaping Retention Approach.

Journal: Materials (Basel, Switzerland)

Published: January 13, 2021

Between-the-Holes Cryogenic Cooling of the Tool in Hole-Making of Ti-6Al-4V and CFRP.

Between-the-Holes Cryogenic Cooling of the Tool in Hole-Making of Ti-6Al-4V and CFRP.

Journal: Materials (Basel, Switzerland)

Published: January 04, 2021

Showing 1-12 of 38

Last Updated: 09/26/2026