Nasser M. Alqahtani

Abha, 62529, Saudi Arabia

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 44 publications

Evaluating micro-CT as a tool for advanced research in prosthetic dentistry: systematic review and meta-analysis.

Evaluating micro-CT as a tool for advanced research in prosthetic dentistry: systematic review and meta-analysis.

Journal: Odontology

Published: October 09, 2025

3D printing vs. conventional wax patterns: a comparative in vitro study on retention of RPD framework.

3D printing vs. conventional wax patterns: a comparative in vitro study on retention of RPD framework.

Journal: Odontology

Published: September 25, 2025

Retention of 3-D-Printed, Milled, and Conventionally Fabricated Occlusal Splints.

Retention of 3-D-Printed, Milled, and Conventionally Fabricated Occlusal Splints.

Journal: Medical science monitor : international medical journal of experimental and clinical research

Published: April 21, 2025

Internal and marginal fit of digitally fabricated all-ceramic crowns with auxiliary retentive features on short clinical abutments: a micro-CT study.

Internal and marginal fit of digitally fabricated all-ceramic crowns with auxiliary retentive features on short clinical abutments: a micro-CT study.

Journal: PeerJ

Published: February 21, 2025

Reliability of Extraoral Scanners in Capturing 3D Geometry for Dental Prostheses: A Systematic Review.

Reliability of Extraoral Scanners in Capturing 3D Geometry for Dental Prostheses: A Systematic Review.

Journal: Medical science monitor : international medical journal of experimental and clinical research

Published: December 12, 2024

Advanced superimposition method to evaluate the marginal and internal fit of ceramic crowns fabricated using heat pressing techniques.

Advanced superimposition method to evaluate the marginal and internal fit of ceramic crowns fabricated using heat pressing techniques.

Journal: PeerJ

Published: October 09, 2024

Comparison of Various Surface Treatment Procedures on the Roughness and Susceptibility to Staining of Provisional Prosthodontic Materials.

Comparison of Various Surface Treatment Procedures on the Roughness and Susceptibility to Staining of Provisional Prosthodontic Materials.

Journal: Journal of functional biomaterials

Published: July 10, 2024

The Impact of Repeated Steam Sterilization Cycles on the Efficacy of Chairside Adjustment Kits for Polishing Monolithic Multi-Layered Zirconia Dental Restoration Material.

The Impact of Repeated Steam Sterilization Cycles on the Efficacy of Chairside Adjustment Kits for Polishing Monolithic Multi-Layered Zirconia Dental Restoration Material.

Journal: Medical science monitor : international medical journal of experimental and clinical research

Published: June 10, 2024

Assessment of dimensional stability of novel VPES impression material at different time intervals with standard disinfectants.

Assessment of dimensional stability of novel VPES impression material at different time intervals with standard disinfectants.

Journal: BMC oral health

Published: November 30, 2023

Dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models over periods of time.

Dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models over periods of time.

Journal: BMC oral health

Published: November 26, 2023

Evaluation of the Effects of Digital Manufacturing, Preparation Taper, Cement Type, and Aging on the Color Stability of Anterior Provisional Crowns Using Colorimetry.

Evaluation of the Effects of Digital Manufacturing, Preparation Taper, Cement Type, and Aging on the Color Stability of Anterior Provisional Crowns Using Colorimetry.

Journal: Medical science monitor basic research

Published: November 21, 2023

Technical assessment of shear bond strength at ceramo-alloy interface after various surface treatment combinations and application of metal bonding agent.

Technical assessment of shear bond strength at ceramo-alloy interface after various surface treatment combinations and application of metal bonding agent.

Journal: Technology and health care : official journal of the European Society for Engineering and Medicine

Published: November 19, 2023

Showing 1-12 of 44

Last Updated: 09/26/2026