Nenad Gubeljak

17 Smetanova Street
Maribor, 2000, Slovenia

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 18 publications

Experimental Testing and Numerical Bite Simulation of Complete Acrylic Dentures in Eugnathic and Progenic Occlusal Relationships.

Experimental Testing and Numerical Bite Simulation of Complete Acrylic Dentures in Eugnathic and Progenic Occlusal Relationships.

Journal: Materials (Basel, Switzerland)

Published: April 18, 2025

Comparison of Three Methods of Measuring Residual Stresses in Welded Joints of High-Strength Steel S960QL.

Comparison of Three Methods of Measuring Residual Stresses in Welded Joints of High-Strength Steel S960QL.

Journal: Materials (Basel, Switzerland)

Published: January 27, 2025

A Study on the Compressive Behavior of Additively Manufactured AlSi10Mg Lattice Structures.

A Study on the Compressive Behavior of Additively Manufactured AlSi10Mg Lattice Structures.

Journal: Materials (Basel, Switzerland)

Published: September 13, 2024

Numerical Simulation of Fatigue Crack Growth and Fracture in Welded Joints Using XFEM-A Review of Case Studies.

Numerical Simulation of Fatigue Crack Growth and Fracture in Welded Joints Using XFEM-A Review of Case Studies.

Journal: Materials (Basel, Switzerland)

Published: July 30, 2024

Evaluation of the Bond Strength between the Acrylic Teeth and Reinforced or Non-reinforced Complete Denture Base.

Evaluation of the Bond Strength between the Acrylic Teeth and Reinforced or Non-reinforced Complete Denture Base.

Journal: Acta stomatologica Croatica

Published: May 13, 2024

The Effects of Ozone Sterilization on the Chemical and Mechanical Properties of 3D-Printed Biocompatible PMMA.

The Effects of Ozone Sterilization on the Chemical and Mechanical Properties of 3D-Printed Biocompatible PMMA.

Journal: Micromachines

Published: February 14, 2024

Experimental and Numerical Analysis of Fracture Mechanics Behavior of Heterogeneous Zones in S690QL1 Grade High Strength Steel (HSS) Welded Joint.

Experimental and Numerical Analysis of Fracture Mechanics Behavior of Heterogeneous Zones in S690QL1 Grade High Strength Steel (HSS) Welded Joint.

Journal: Materials (Basel, Switzerland)

Published: October 03, 2023

Intrinsic Fatigue Limit and the Minimum Fatigue Crack Growth Threshold.

Intrinsic Fatigue Limit and the Minimum Fatigue Crack Growth Threshold.

Journal: Materials (Basel, Switzerland)

Published: July 17, 2023

Modelling of Fatigue Microfracture in Porous Sintered Steel Using a Phase-Field Method.

Modelling of Fatigue Microfracture in Porous Sintered Steel Using a Phase-Field Method.

Journal: Materials (Basel, Switzerland)

Published: April 30, 2023

Total Knee Replacement with an Uncemented Porous Tantalum Tibia Component: A Failure Analysis.

Total Knee Replacement with an Uncemented Porous Tantalum Tibia Component: A Failure Analysis.

Journal: Materials (Basel, Switzerland)

Published: February 20, 2022

Effects of Fixture Configurations and Weld Strength Mismatch on J-Integral Calculation Procedure for SE(B) Specimens.

Effects of Fixture Configurations and Weld Strength Mismatch on J-Integral Calculation Procedure for SE(B) Specimens.

Journal: Materials (Basel, Switzerland)

Published: November 30, 2021

Yield Load Solutions for SE(B) Fracture Toughness Specimen with I-Shaped Heterogeneous Weld.

Yield Load Solutions for SE(B) Fracture Toughness Specimen with I-Shaped Heterogeneous Weld.

Journal: Materials (Basel, Switzerland)

Published: November 23, 2021

Showing 1-12 of 18

Last Updated: 09/26/2026