Pawel Turek

Powstańców Warszawy Avenue 12
Rzeszow, PK 35959, Poland

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 18 publications

Metrological Evaluation of Dimensional and Surface Roughness of Thermoplastic PLA Parts in High-Speed MEX 3D Printing Using a Dodecahedron Benchmark Geometry.

Metrological Evaluation of Dimensional and Surface Roughness of Thermoplastic PLA Parts in High-Speed MEX 3D Printing Using a Dodecahedron Benchmark Geometry.

Journal: Materials (Basel, Switzerland)

Published: July 06, 2026

Influence of Machining Allowance, Build Orientation, and Cutting Parameters on Hole Quality in Additively Manufactured ABS Components.

Influence of Machining Allowance, Build Orientation, and Cutting Parameters on Hole Quality in Additively Manufactured ABS Components.

Journal: Materials (Basel, Switzerland)

Published: June 12, 2026

Advanced Manufacturing of PLA Surgical Templates for Orbital Floor Geometry: Optimizing Fidelity and Surface Morphology via Variable Layer Height MEX 3D Printing.

Advanced Manufacturing of PLA Surgical Templates for Orbital Floor Geometry: Optimizing Fidelity and Surface Morphology via Variable Layer Height MEX 3D Printing.

Journal: Materials (Basel, Switzerland)

Published: February 16, 2026

The Influence of Model Orientation on the Surface Roughness of Polymeric Models Produced by FFF, mSLA, PJ, and SLS Methods.

The Influence of Model Orientation on the Surface Roughness of Polymeric Models Produced by FFF, mSLA, PJ, and SLS Methods.

Journal: Materials (Basel, Switzerland)

Published: October 25, 2025

Optimization of Outflow-Tract Ventricular Arrhythmia Ablation Using a Universal Right Ventricle Model.

Optimization of Outflow-Tract Ventricular Arrhythmia Ablation Using a Universal Right Ventricle Model.

Journal: Journal of cardiovascular development and disease

Published: May 27, 2025

Evaluation of High-Temperature Sterilization Processes: Their Influence on the Mechanical Integrity of Additively Manufactured Polymeric Biomaterials.

Evaluation of High-Temperature Sterilization Processes: Their Influence on the Mechanical Integrity of Additively Manufactured Polymeric Biomaterials.

Journal: Materials (Basel, Switzerland)

Published: January 23, 2025

Evaluation of Macro- and Micro-Geometry of Models Made of Photopolymer Resins Using the PolyJet Method.

Evaluation of Macro- and Micro-Geometry of Models Made of Photopolymer Resins Using the PolyJet Method.

Journal: Materials (Basel, Switzerland)

Published: July 23, 2024

Innovative Approaches to 3D Printing of PA12 Forearm Orthoses: A Comprehensive Analysis of Mechanical Properties and Production Efficiency.

Innovative Approaches to 3D Printing of PA12 Forearm Orthoses: A Comprehensive Analysis of Mechanical Properties and Production Efficiency.

Journal: Materials (Basel, Switzerland)

Published: December 15, 2023

Influence of Antibacterial Coating and Mechanical and Chemical Treatment on the Surface Properties of PA12 Parts Manufactured with SLS and MJF Techniques in the Context of Medical Applications.

Influence of Antibacterial Coating and Mechanical and Chemical Treatment on the Surface Properties of PA12 Parts Manufactured with SLS and MJF Techniques in the Context of Medical Applications.

Journal: Materials (Basel, Switzerland)

Published: February 17, 2023

Manufacturing Polymer Model of Anatomical Structures with Increased Accuracy Using CAx and AM Systems for Planning Orthopedic Procedures.

Manufacturing Polymer Model of Anatomical Structures with Increased Accuracy Using CAx and AM Systems for Planning Orthopedic Procedures.

Journal: Polymers

Published: April 14, 2022

Characterisation of Selected Materials in Medical Applications.

Characterisation of Selected Materials in Medical Applications.

Journal: Polymers

Published: March 21, 2022

Procedure Increasing the Accuracy of Modelling and the Manufacturing of Surgical Templates with the Use of 3D Printing Techniques, Applied in Planning the Procedures of Reconstruction of the Mandible.

Procedure Increasing the Accuracy of Modelling and the Manufacturing of Surgical Templates with the Use of 3D Printing Techniques, Applied in Planning the Procedures of Reconstruction of the Mandible.

Journal: Journal of clinical medicine

Published: October 05, 2021

Showing 1-12 of 18

Last Updated: 09/26/2026