Tanya Kairn

Butterfield Street
Herston, QLD 4029, Australia

Last Updated: 09/26/2026

Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 88 publications

Feasibility study: Use of an optical scanning system to obtain 3D body surface images suitable for total skin electron therapy treatment dosimetry.

Feasibility study: Use of an optical scanning system to obtain 3D body surface images suitable for total skin electron therapy treatment dosimetry.

Journal: Journal of applied clinical medical physics
Published: March 30, 2026

HDR brachytherapy postal audit across Australia and New Zealand with in air jig.

HDR brachytherapy postal audit across Australia and New Zealand with in air jig.

Journal: Physical and engineering sciences in medicine
Published: December 03, 2025

A prospective hazard analysis of real-time adaptive helical tomotherapy.

A prospective hazard analysis of real-time adaptive helical tomotherapy.

Journal: Journal of applied clinical medical physics
Published: September 16, 2025

Commissioning Tests of Radixact Synchrony Using Patient-Specific 3D-Printed Lung Phantom Inserts.

Commissioning Tests of Radixact Synchrony Using Patient-Specific 3D-Printed Lung Phantom Inserts.

Journal: Cureus
Published: May 05, 2025

A System for Verifying Radiation Therapy Treatments That Use Multiple Modes of Real-Time Motion Adaptation.

A System for Verifying Radiation Therapy Treatments That Use Multiple Modes of Real-Time Motion Adaptation.

Journal: Cureus
Published: April 25, 2025

Use of Motion Management to Model Unmanaged Motion: Dosimetric Consequences of Unmanaged Prostate Motion Assessed Using Real-Time Radiotherapy Adaptation Data.

Use of Motion Management to Model Unmanaged Motion: Dosimetric Consequences of Unmanaged Prostate Motion Assessed Using Real-Time Radiotherapy Adaptation Data.

Journal: Cureus
Published: April 20, 2025

Use of light-weight foaming polylactic acid as a lung-equivalent material in 3D printed phantoms.

Use of light-weight foaming polylactic acid as a lung-equivalent material in 3D printed phantoms.

Journal: Physical and engineering sciences in medicine
Published: March 22, 2023

A structure-based gamma evaluation method for identifying clinically relevant dose differences in organs at risk.

A structure-based gamma evaluation method for identifying clinically relevant dose differences in organs at risk.

Journal: Physical and engineering sciences in medicine
Published: August 02, 2022

Development of a customisable 3D-printed intra-oral stent for head-and-neck radiotherapy.

Development of a customisable 3D-printed intra-oral stent for head-and-neck radiotherapy.

Journal: Technical innovations & patient support in radiation oncology
Published: March 25, 2022

Evaluation of optical 3D scanning system for radiotherapy use.

Evaluation of optical 3D scanning system for radiotherapy use.

Journal: Journal of medical radiation sciences
Published: October 08, 2021

A publicly available dataset of out-of-field dose profiles of a 6 MV linear accelerator.

A publicly available dataset of out-of-field dose profiles of a 6 MV linear accelerator.

Journal: Physical and engineering sciences in medicine
Published: September 28, 2021

Use ofin vivotransit portal images to detect gross inter-fraction patient geometry changes on an O-ring type linear accelerator for pelvis and head/neck patients.

Use ofin vivotransit portal images to detect gross inter-fraction patient geometry changes on an O-ring type linear accelerator for pelvis and head/neck patients.

Journal: Biomedical physics & engineering express
Published: July 22, 2021
Showing 1-12 of 88

Last Updated: 09/26/2026