Tatsuhiko Aizawa

Shibaura, 1440056, Japan

Last Updated: 09/26/2026

Save publications for later
Sign Up
Not sure about your diagnosis?
Check Your Symptoms
Found 13 publications

Laser Micromachining for the Nucleation Control of Nickel Microtextures for IR Emission.

Laser Micromachining for the Nucleation Control of Nickel Microtextures for IR Emission.

Journal: Micromachines
Published: March 24, 2025

Punch Edge Topological Design for Reduction of Work Hardening Damage in Shearing of Non-Oriented Electrical Steel Sheets.

Punch Edge Topological Design for Reduction of Work Hardening Damage in Shearing of Non-Oriented Electrical Steel Sheets.

Journal: Materials (Basel, Switzerland)
Published: December 31, 2024

Galling-Free Dry Near-Net Forging of Titanium Using Massively Carbon-Supersaturated Tool Steel Dies.

Galling-Free Dry Near-Net Forging of Titanium Using Massively Carbon-Supersaturated Tool Steel Dies.

Journal: Materials (Basel, Switzerland)
Published: August 18, 2024

In Situ Lubrication in Forging of Pure Titanium Using Carbon Supersaturated Die Materials.

In Situ Lubrication in Forging of Pure Titanium Using Carbon Supersaturated Die Materials.

Journal: Nanomaterials (Basel, Switzerland)
Published: December 19, 2023

Micro-/Meso-Structure Control of Multi-Hostmetal Alloys by Massive Nitrogen Supersaturation.

Micro-/Meso-Structure Control of Multi-Hostmetal Alloys by Massive Nitrogen Supersaturation.

Journal: Materials (Basel, Switzerland)
Published: November 17, 2023

Fabrication and Characterization of Acicular Micro-Textured Copper Sheet Device for Low-Temperature Heat Radiation.

Fabrication and Characterization of Acicular Micro-Textured Copper Sheet Device for Low-Temperature Heat Radiation.

Journal: Micromachines
Published: December 30, 2022

Quantitative Characterization of the Affected Zones in a Single Crystal Fe-6Si Steel Sheet by Fine Piercing.

Quantitative Characterization of the Affected Zones in a Single Crystal Fe-6Si Steel Sheet by Fine Piercing.

Journal: Micromachines
Published: February 27, 2022

Micro-/Nano-Texturing onto Plasma-Nitrided Tool Surface by Laser Printing for CNC Imprinting and Piercing.

Micro-/Nano-Texturing onto Plasma-Nitrided Tool Surface by Laser Printing for CNC Imprinting and Piercing.

Journal: Micromachines
Published: January 02, 2022

Fine Piercing of Amorphous Electrical Steel Sheet Stack by Micro-/Nano-Textured Punch.

Fine Piercing of Amorphous Electrical Steel Sheet Stack by Micro-/Nano-Textured Punch.

Journal: Materials (Basel, Switzerland)
Published: December 24, 2021

Free-Forging of Pure Titanium with High Reduction of Thickness by Plasma-Carburized SKD11 Dies.

Free-Forging of Pure Titanium with High Reduction of Thickness by Plasma-Carburized SKD11 Dies.

Journal: Materials (Basel, Switzerland)
Published: March 03, 2021

Femtosecond Laser Trimming with Simultaneous Nanostructuring to Fine Piercing Punch to Electrical Amorphous Steel Sheets.

Femtosecond Laser Trimming with Simultaneous Nanostructuring to Fine Piercing Punch to Electrical Amorphous Steel Sheets.

Journal: Micromachines
Published: January 18, 2021

Dry Cold Forging of Pure Titanium Wire to Thin Plate with Use of β-SiC Coating Dies.

Dry Cold Forging of Pure Titanium Wire to Thin Plate with Use of β-SiC Coating Dies.

Journal: Materials (Basel, Switzerland)
Published: August 02, 2020
Showing 1-12 of 13

Last Updated: 09/26/2026