Tomasz Cygan

Woloska 141 St
Warsaw, MZ 02507, Poland

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 12 publications

Wear Behavior of Al2O3/Ti3AlC2-MAX Composites at Elevated Temperatures.

Wear Behavior of Al2O3/Ti3AlC2-MAX Composites at Elevated Temperatures.

Journal: Materials (Basel, Switzerland)

Published: July 17, 2025

Mechanical Properties of Silicon Carbide Composites Reinforced with Reduced Graphene Oxide.

Mechanical Properties of Silicon Carbide Composites Reinforced with Reduced Graphene Oxide.

Journal: Materials (Basel, Switzerland)

Published: June 07, 2024

Effect of Anisotropy of Reduced Graphene Oxide on Thermal and Electrical Properties in Silicon Carbide Matrix Composites.

Effect of Anisotropy of Reduced Graphene Oxide on Thermal and Electrical Properties in Silicon Carbide Matrix Composites.

Journal: Nanomaterials (Basel, Switzerland)

Published: February 19, 2024

Synthesis of Ti3SiC2 Phases and Consolidation of MAX/SiC Composites-Microstructure and Mechanical Properties.

Synthesis of Ti3SiC2 Phases and Consolidation of MAX/SiC Composites-Microstructure and Mechanical Properties.

Journal: Materials (Basel, Switzerland)

Published: December 28, 2022

Novel Alumina Matrix Composites Reinforced with MAX Phases-Microstructure Analysis and Mechanical Properties.

Novel Alumina Matrix Composites Reinforced with MAX Phases-Microstructure Analysis and Mechanical Properties.

Journal: Materials (Basel, Switzerland)

Published: September 09, 2022

Modelling and Characterisation of Residual Stress of SiC-Ti3C2Tx MXene Composites Sintered via Spark Plasma Sintering Method.

Modelling and Characterisation of Residual Stress of SiC-Ti3C2Tx MXene Composites Sintered via Spark Plasma Sintering Method.

Journal: Materials (Basel, Switzerland)

Published: December 20, 2021

Investigation of MXenes Oxidation Process during SPS Method Annealing.

Investigation of MXenes Oxidation Process during SPS Method Annealing.

Journal: Materials (Basel, Switzerland)

Published: September 09, 2021

Influence of Ti3C2Tx MXene and Surface-Modified Ti3C2Tx MXene Addition on Microstructure and Mechanical Properties of Silicon Carbide Composites Sintered via Spark Plasma Sintering Method.

Influence of Ti3C2Tx MXene and Surface-Modified Ti3C2Tx MXene Addition on Microstructure and Mechanical Properties of Silicon Carbide Composites Sintered via Spark Plasma Sintering Method.

Journal: Materials (Basel, Switzerland)

Published: June 05, 2021

Microstructure and Mechanical Properties of Alumina Composites with Addition of Structurally Modified 2D Ti3C2 (MXene) Phase.

Microstructure and Mechanical Properties of Alumina Composites with Addition of Structurally Modified 2D Ti3C2 (MXene) Phase.

Journal: Materials (Basel, Switzerland)

Published: December 19, 2020

Influence of MXene (Ti3C2) Phase Addition on the Microstructure and Mechanical Properties of Silicon Nitride Ceramics.

Influence of MXene (Ti3C2) Phase Addition on the Microstructure and Mechanical Properties of Silicon Nitride Ceramics.

Journal: Materials (Basel, Switzerland)

Published: October 16, 2020

Closed Die Upsetting of Aluminum Matrix Composites Reinforced with Molybdenum Disulfide Nanocrystals and Multilayer Graphene, Implemented using the SPS Process-Microstructure Evolution.

Closed Die Upsetting of Aluminum Matrix Composites Reinforced with Molybdenum Disulfide Nanocrystals and Multilayer Graphene, Implemented using the SPS Process-Microstructure Evolution.

Journal: Materials (Basel, Switzerland)

Published: April 11, 2018

Tribological Properties of Aluminium Alloy Composites Reinforced with Multi-Layer Graphene-The Influence of Spark Plasma Texturing Process.

Tribological Properties of Aluminium Alloy Composites Reinforced with Multi-Layer Graphene-The Influence of Spark Plasma Texturing Process.

Journal: Materials (Basel, Switzerland)

Published: June 28, 2017

Showing 1-12 of 12

Last Updated: 09/26/2026