Zhaodong Wang

Key Laboratory For Anisotropy And Texture Of Materials
Shenyang, 110819, China

Last Updated: 09/26/2026

Save publications for later

Sign Up

Not sure about your diagnosis?

Check Your Symptoms

Found 14 publications

Nanoscale α Phase Enables Excellent Strength-Ductility Balance in TC21 Titanium Alloy.

Nanoscale α Phase Enables Excellent Strength-Ductility Balance in TC21 Titanium Alloy.

Journal: Nanomaterials (Basel, Switzerland)

Published: March 16, 2026

Cluster-Mediated Solute Stabilization and Shear-Bypass Synergistic Strengthening in High-Alloyed Systems.

Cluster-Mediated Solute Stabilization and Shear-Bypass Synergistic Strengthening in High-Alloyed Systems.

Journal: Advanced science (Weinheim, Baden-Wurttemberg, Germany)

Published: November 08, 2025

A Systematical Evaluation of the Crystallographic Orientation Relationship between MC Precipitates and Ferrite Matrix in HSLA Steels.

A Systematical Evaluation of the Crystallographic Orientation Relationship between MC Precipitates and Ferrite Matrix in HSLA Steels.

Journal: Materials (Basel, Switzerland)

Published: April 14, 2022

The Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Ti-Microalloyed Steel Plates.

The Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Ti-Microalloyed Steel Plates.

Journal: Materials (Basel, Switzerland)

Published: January 21, 2022

Effect of Solidification and Hot Rolling Processes on Wear Performance of TiC-Reinforced Wear-Resistant Steel.

Effect of Solidification and Hot Rolling Processes on Wear Performance of TiC-Reinforced Wear-Resistant Steel.

Journal: Materials (Basel, Switzerland)

Published: December 16, 2021

Experimental study on temperature drop during roller quenching process of large-section ultra-heavy steel plate.

Experimental study on temperature drop during roller quenching process of large-section ultra-heavy steel plate.

Journal: Science progress

Published: May 12, 2021

Mechanism of the Microstructural Evolution of 18Cr2Ni4WA Steel during Vacuum Low-Pressure Carburizing Heat Treatment and Its Effect on Case Hardness.

Mechanism of the Microstructural Evolution of 18Cr2Ni4WA Steel during Vacuum Low-Pressure Carburizing Heat Treatment and Its Effect on Case Hardness.

Journal: Materials (Basel, Switzerland)

Published: April 21, 2020

A Novel Approach to Improve the Microstructure and Mechanical Properties of Al-Mg-Si Aluminum Alloys during Twin-Roll Casting.

A Novel Approach to Improve the Microstructure and Mechanical Properties of Al-Mg-Si Aluminum Alloys during Twin-Roll Casting.

Journal: Materials (Basel, Switzerland)

Published: March 18, 2020

The Effects of Hot-Pack Coating Materials on the Pack Rolling Process and Microstructural Characteristics during Ti-46Al-8Nb Sheet Fabrication.

The Effects of Hot-Pack Coating Materials on the Pack Rolling Process and Microstructural Characteristics during Ti-46Al-8Nb Sheet Fabrication.

Journal: Materials (Basel, Switzerland)

Published: January 15, 2020

The Impact of Isothermal Treatment on the Microstructural Evolution and the Precipitation Behavior in High Strength Linepipe Steel.

The Impact of Isothermal Treatment on the Microstructural Evolution and the Precipitation Behavior in High Strength Linepipe Steel.

Journal: Materials (Basel, Switzerland)

Published: December 19, 2019

Effects of the Quenching Rate on the Microstructure, Mechanical Properties and Paint Bake-Hardening Response of Al-Mg-Si Automotive Sheets.

Effects of the Quenching Rate on the Microstructure, Mechanical Properties and Paint Bake-Hardening Response of Al-Mg-Si Automotive Sheets.

Journal: Materials (Basel, Switzerland)

Published: September 20, 2019

Influence of Inter-Pass Cooling on Microstructural Evolution and Plastic Deformation of Heavy EH47 Plates.

Influence of Inter-Pass Cooling on Microstructural Evolution and Plastic Deformation of Heavy EH47 Plates.

Journal: Materials (Basel, Switzerland)

Published: April 19, 2019

Showing 1-12 of 14

Last Updated: 09/26/2026